Emerson Electric EasyHeat™ Category_Pipes & Fittings Requires nut driver to be

Requires nut driver to be installed

Gas water heater installation kit

Flares All Standard Sizes Of Soft Copper

Single Left side flush: 1

Emerson Electric EasyHeat™ Category_Pipes & Fittings Requires nut driver to beFixed Resistance, Pre terminated. For Commercial and Residential Applications Keeps water flowing at ambient temperatures down to 40 F ( 40 C) Cables are rated at 7 Watts per 1 ft (0. 30 m) Built in thermostat turns on at +38 F (+3 C) or below and turns off at +45 F (+7 C) and above Plugs into a standard 120 Vac outlet, must be GFCI protected Each cable consists of tough XLPE inner insulation, a continuous ground braid and weather resistant PVC (high