Stainless Steel Drilling Guide Groundwater Filter including G7c and G7x

including G7c and G7x

RASTER SCREEN PAPER CUTTER BLADE

thread the Vapor Pin® into the coupling at the bottom of the tool

The inner layer material is not only soft and hypo-allergenic

Stainless Steel Drilling Guide Groundwater Filter including G7c and G7xUsed to establish the proper depth of the 1 1 2" diameter hole and center the 5 8" hole for proper Vapor Pin sampling device installation to accept the secure cover. While wearing PPE, drill a 1 inch diameter hole into the concrete slab to a depth of approximately 1 3 4 inches. Pre marking the desired depth on the drill bit with tape will assist in this process. Remove cuttings from the hole and place the Drilling Guide in the hole with the conical